Mobile submersible motor pumps, such as the KTP 300, are used wherever it is not worth using a permanently installed pump. The KTP 300 pumps up to 8 m3 of water an hour up to a maximum height of 6 metres and is, therefore, also ideal for pumping large quantities of clear water, rainwater and wastewater from swimming pools, ponds, excavations etc. It is also suitable for continuous operation with a constant load (S1). The KTP 300 is available either with or without a float switch.
Features & benefits
- Mobile submersible motor pump suitable for temporary applications where permanent installation is not required
- Pumps up to 8 m³ of water per hour
- Maximum pumping height of 6 metres
- Suitable for clear water, rainwater, and wastewater
- Suitable for continuous operation with constant load (S1)
- Available with or without float switch
- Available in standard and corrosion-resistant (resistant) versions
Applications
- Swimming pools
- Ponds
- Excavations
- Rainwater drainage
- Clear water pumping
- Wastewater pumping
- Temporary/mobile pumping installations
Technical specifications
| Max. flow rate | 8 m³/h |
|---|---|
| Max. head | 6 m |
| Operating voltage | 230 V |
| Duty cycle | S1 (continuous operation with constant load) |
| Wastewater type | Without sewage |
Article overview
Aquadive KTP 300
Pump KTP 300
Pump KTP 300
| Picture | Pump | Type of wastewater | Type of level measurement | Operating voltage | Item no. | Show |
|---|---|---|---|---|---|---|
 | KTP 300 | without sewage | 230 V | 28740 | Show 28740 | |
 | KTP 300 resistant | without sewage | 230 V | 28740C | Show 28740C | |
 | KTP 300 | without sewage | mechanical | 230 V | 28840 | Show 28840 |
 | KTP 300 resistant | without sewage | mechanical | 230 V | 28840C | Show 28840C |