Ecoguss Floor and Roof Drain

An innovation which sets standards: the Ecoguss floor/roof drain uses the specially developed composite material of the same name, which combines the specific advantages of polymer and metal. The Ecoguss is therefore an economic and easy-to-install alternative to drains made of grey iron. At the same time, it offers enormous advantages with regard to hygiene as well as fire protection and sound insulation and is therefore particularly suitable for public buildings such as hotels, hospitals or swimming pools.

The Ecoguss is optionally available with a horizontal or vertical outlet and in different nominal sizes ranging from DN 50 to DN 100.

Resistance, convenience, cleanliness — all these are offered by Ecoguss, a high-tech composite material. This innovative material combines the advantages of polymer and metal: it is three times lighter than cast iron and at the same time temperature-resistant as well as highly resistant to chemical and mechanical stress. In addition, Ecoguss is non-corrosive and extremely hygienic — thanks to its uncoated, smooth surface, which prevents deposits and thus ensures a strong self-cleaning effect.

In case of fire, water outlets constitute a risk, as the fire can pass through the discharge pipes and spread to other parts of the building. For protection purposes, the drains can be equipped with the Fire-Kit fire and smoke protection insert or the Quick-Fit pipe penetration seal with integrated fire protection. As soon as fire penetrates the drain body, the fire protection compound inside it swells automatically and seals the pipe socket against flames and smoke. Both the Fire-Kit and the Quick-Fit fulfil the highest fire resistance class R 120.

The Ecoguss was tested by the Fraunhofer Institute for its sound-proofing effect. The measurements resulted in values of ≥ 16 dB(A) according to DIN 4109 as well as ≥ 14 dB(A) according to VDI 4100 SST III. This means that the Ecoguss has a proven sound-inhibiting effect.

If wastewater is contaminated with chemicals (e.g. sieve wastewater or wastewater in a storage room for chemicals), conventional drainage solutions reach the limits of their resistance. There is now a solution for this with the Ecoguss resistant floor drain. With its resistance, Ecoguss resistant far surpasses conventional product solutions made of stainless steel or plastic. This is ensured not only by the individual components of the drain body, extension section and upper section with cover made of Ecoguss, but also by special chemical-resistant seals.

Features & benefits

• Three times lighter than cast iron
• Temperature-resistant composite material (Ecoguss)
• Highly resistant to chemical and mechanical stress
• Non-corrosive construction
• Extremely hygienic with uncoated, smooth surface
• Strong self-cleaning effect due to smooth surface
• Optional fire protection via Fire-Kit or Quick-Fit insert
• Achieves fire resistance class R 120
• Scientifically proven sound insulation ≥ 16 dB(A) per DIN 4109
• Sound insulation ≥ 14 dB(A) per VDI 4100 SST III (tested by Fraunhofer Institute)
• Economic alternative to grey iron drains
• Easy to install
• Available with horizontal or vertical outlet
• Available in nominal sizes DN 50 to DN 100
• Chemical-resistant variant available (Ecoguss resistant)
• Odour trap included in most models
• Waterproofing layer options: connection flange or enclosed sealing collar (DIN 18534)
• Load classes K 3 and L 15 per EN 1253-1

Applications

• Hotels
• Hospitals
• Swimming pools and spa areas
• Public buildings with high hygiene requirements
• Buildings requiring fire protection standards (R 120)
• Facilities with chemical wastewater contamination
• Chemical storage facilities
• Food preparation areas
• Industrial facilities with specialised wastewater
• Bathroom and wet room areas requiring sound insulation

Technical specifications

Article overview

Ecoguss project drain System 125

Vertical outlet

With pressure sealing flange

Picture	Load class	Nominal size (DN)	Odour trap	Waterproofing layer on the upper section	Item no.	Show
	K 3 (EN 1253-1)	100	included	Connection flange	48811.11	Show 48811.11
	K 3 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48811.51	Show 48811.51
	L 15 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48811.53	Show 48811.53
	L 15 (EN 1253-1)	100	included	Connection flange	48811.63	Show 48811.63
	K 3 (EN 1253-1)	50	included	Connection flange	48858.11	Show 48858.11
	K 3 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48858.51	Show 48858.51
	L 15 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48858.53	Show 48858.53
	L 15 (EN 1253-1)	50	included	Connection flange	48858.63	Show 48858.63
	K 3 (EN 1253-1)	70	included	Connection flange	48878.11	Show 48878.11
	K 3 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48878.51	Show 48878.51
	L 15 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48878.53	Show 48878.53
	L 15 (EN 1253-1)	70	included	Connection flange	48878.63	Show 48878.63
	K 3 (EN 1253-1)	80	included	Connection flange	48883.11	Show 48883.11
	K 3 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48883.51	Show 48883.51
	L 15 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48883.53	Show 48883.53
	L 15 (EN 1253-1)	80	included	Connection flange	48883.63	Show 48883.63

With glued flange

Picture	Load class	Nominal size (DN)	Odour trap	Waterproofing layer on the upper section	Item no.	Show
	K 3 (EN 1253-1)	100	included	Connection flange	48611.11	Show 48611.11
	K 3 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48611.51	Show 48611.51
	L 15 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48611.53	Show 48611.53
	L 15 (EN 1253-1)	100	included	Connection flange	48611.63	Show 48611.63
	K 3 (EN 1253-1)	50	included	Connection flange	48658.11	Show 48658.11
	K 3 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48658.51	Show 48658.51
	L 15 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48658.53	Show 48658.53
	L 15 (EN 1253-1)	50	included	Connection flange	48658.63	Show 48658.63
	K 3 (EN 1253-1)	70	included	Connection flange	48678.11	Show 48678.11
	K 3 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48678.51	Show 48678.51
	L 15 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48678.53	Show 48678.53
	L 15 (EN 1253-1)	70	included	Connection flange	48678.63	Show 48678.63
	K 3 (EN 1253-1)	80	included	Connection flange	48683.11	Show 48683.11
	K 3 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48683.51	Show 48683.51
	L 15 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48683.53	Show 48683.53
	L 15 (EN 1253-1)	80	included	Connection flange	48683.63	Show 48683.63

With connection rim

Picture	Load class	Nominal size (DN)	Odour trap	Waterproofing layer on the upper section	Item no.	Show
	K 3 (EN 1253-1)	100	included	Connection flange	48411.11	Show 48411.11
	K 3 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48411.51	Show 48411.51
	L 15 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48411.53	Show 48411.53
	L 15 (EN 1253-1)	100	included	Connection flange	48411.63	Show 48411.63
	K 3 (EN 1253-1)	50	included	Connection flange	48458.11	Show 48458.11
	K 3 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48458.51	Show 48458.51
	L 15 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48458.53	Show 48458.53
	L 15 (EN 1253-1)	50	included	Connection flange	48458.63	Show 48458.63
	K 3 (EN 1253-1)	70	included	Connection flange	48478.11	Show 48478.11
	K 3 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48478.51	Show 48478.51
	L 15 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48478.53	Show 48478.53
	L 15 (EN 1253-1)	70	included	Connection flange	48478.63	Show 48478.63
	K 3 (EN 1253-1)	80	included	Connection flange	48483.11	Show 48483.11
	K 3 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48483.51	Show 48483.51
	L 15 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48483.53	Show 48483.53
	L 15 (EN 1253-1)	80	included	Connection flange	48483.63	Show 48483.63

Horizontal outlet

With pressure sealing flange

Picture	Load class	Nominal size (DN)	Odour trap	Waterproofing layer on the upper section	Item no.	Show
	K 3 (EN 1253-1)	100	included	Connection flange	48711.11	Show 48711.11
	K 3 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48711.51	Show 48711.51
	L 15 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48711.53	Show 48711.53
	L 15 (EN 1253-1)	100	included	Connection flange	48711.63	Show 48711.63
	K 3 (EN 1253-1)	50	included	Connection flange	48758.11	Show 48758.11
	K 3 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48758.51	Show 48758.51
	L 15 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48758.53	Show 48758.53
	L 15 (EN 1253-1)	50	included	Connection flange	48758.63	Show 48758.63
	K 3 (EN 1253-1)	70	included	Connection flange	48778.11	Show 48778.11
	K 3 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48778.51	Show 48778.51
	L 15 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48778.53	Show 48778.53
	L 15 (EN 1253-1)	70	included	Connection flange	48778.63	Show 48778.63
	K 3 (EN 1253-1)	80	included	Connection flange	48783.11	Show 48783.11
	K 3 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48783.51	Show 48783.51
	L 15 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48783.53	Show 48783.53
	L 15 (EN 1253-1)	80	included	Connection flange	48783.63	Show 48783.63

With glued flange

Picture	Load class	Nominal size (DN)	Odour trap	Waterproofing layer on the upper section	Item no.	Show
	K 3 (EN 1253-1)	100	included	Connection flange	48511.11	Show 48511.11
	K 3 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48511.51	Show 48511.51
	L 15 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48511.53	Show 48511.53
	L 15 (EN 1253-1)	100	included	Connection flange	48511.63	Show 48511.63
	K 3 (EN 1253-1)	50	included	Connection flange	48558.11	Show 48558.11
	K 3 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48558.51	Show 48558.51
	L 15 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48558.53	Show 48558.53
	L 15 (EN 1253-1)	50	included	Connection flange	48558.63	Show 48558.63
	K 3 (EN 1253-1)	70	included	Connection flange	48578.11	Show 48578.11
	K 3 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48578.51	Show 48578.51
	L 15 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48578.53	Show 48578.53
	L 15 (EN 1253-1)	70	included	Connection flange	48578.63	Show 48578.63
	K 3 (EN 1253-1)	80	included	Connection flange	48583.11	Show 48583.11
	K 3 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48583.51	Show 48583.51
	L 15 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48583.53	Show 48583.53
	L 15 (EN 1253-1)	80	included	Connection flange	48583.63	Show 48583.63

With connection rim

Picture	Load class	Nominal size (DN)	Odour trap	Waterproofing layer on the upper section	Item no.	Show
	K 3 (EN 1253-1)	100	included	Connection flange	48311.11	Show 48311.11
	K 3 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48311.51	Show 48311.51
	L 15 (EN 1253-1)	100	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48311.53	Show 48311.53
	L 15 (EN 1253-1)	100	included	Connection flange	48311.63	Show 48311.63
	K 3 (EN 1253-1)	50	included	Connection flange	48358.11	Show 48358.11
	K 3 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48358.51	Show 48358.51
	L 15 (EN 1253-1)	50	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48358.53	Show 48358.53
	L 15 (EN 1253-1)	50	included	Connection flange	48358.63	Show 48358.63
	K 3 (EN 1253-1)	70	included	Connection flange	48378.11	Show 48378.11
	K 3 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48378.51	Show 48378.51
	L 15 (EN 1253-1)	70	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48378.53	Show 48378.53
	L 15 (EN 1253-1)	70	included	Connection flange	48378.63	Show 48378.63
	K 3 (EN 1253-1)	80	included	Connection flange	48383.11	Show 48383.11
	K 3 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48383.51	Show 48383.51
	L 15 (EN 1253-1)	80	included	Enclosed sealing collar to be glued (bd) according to DIN 18534	48383.53	Show 48383.53
	L 15 (EN 1253-1)	80	included	Connection flange	48383.63	Show 48383.63

Ecoguss drain body System 125

Vertical outlet

With pressure sealing flange

Picture	Nominal size (DN)	Odour trap	Item no.	Show
	100	included	48811	Show 48811
	100		48812	Show 48812
	50	included	48858	Show 48858
	70	included	48878	Show 48878
	70		48879	Show 48879
	80	included	48883	Show 48883
	80		48889	Show 48889

With glued flange

Picture	Nominal size (DN)	Odour trap	Item no.	Show
	100	included	48611	Show 48611
	50	included	48658	Show 48658
	70	included	48678	Show 48678
	80	included	48683	Show 48683

With connection rim

Picture	Nominal size (DN)	Odour trap	Item no.	Show
	100	included	48411	Show 48411
	50	included	48458	Show 48458
	70	included	48478	Show 48478
	80	included	48483	Show 48483

Horizontal outlet

With pressure sealing flange

Picture	Nominal size (DN)	Odour trap	Item no.	Show
	100	included	48711	Show 48711
	50	included	48758	Show 48758
	70	included	48778	Show 48778
	80	included	48783	Show 48783

With glued flange

Picture	Nominal size (DN)	Odour trap	Item no.	Show
	100	included	48511	Show 48511
	50	included	48558	Show 48558
	70	included	48578	Show 48578
	80	included	48583	Show 48583

With connection rim

Picture	Nominal size (DN)	Odour trap	Item no.	Show
	100	included	48311	Show 48311
	50	included	48358	Show 48358
	70	included	48378	Show 48378
	80	included	48383	Show 48383

Documents & resources

• Chemical Resistance List for Drains (PDF)
• Installation and Operating Instructions (service index)
• Catalogues and Brochures (service index)
• BIM Data and CAD Drawings (service index)
• SmartSelect Design Assistant