The Ecolift M functions as a hybrid lifting station that pumps only when it is really necessary – in the event of backwater. Otherwise, the Ecolift M simply makes use of the natural gradient to the sewer. This saves energy. Since it only rarely runs, it also does not need as much maintenance. It is also more reliable because it works without any power as it makes use of the gradient – unlike conventional lifting stations.
The Ecolift M is available in the nominal sizes DN 100 (Ø 110 mm), DN 125 (Ø 125 mm), DN 150 (Ø 160 mm) and DN 200 (Ø 200 mm) as well as for installation in an exposed drainage pipe or floor slab. The latter version is optionally available with a black or tileable cover.
The Ecolift M for floor slab installation helps to prevent radon from entering buildings. The hybrid lifting station has been tested and certified as radon-proof.
The system can also be installed in waterproof concrete by using an extension piece with a central flange and an elastomer waterproofing membrane. The integrated drainage function ensures that any surface water that arises, for example due to a pipe break, will be pumped into the sewer despite there being backwater.
The Ecolift M features a plug-in ready Comfort control unit with the self-diagnosis system SDS, a display for showing the operating status and maintenance information as well as a connection option for centralised control systems.
The Ecolift M's energy consumption is 90% lower compared to conventional lifting stations and, at the same time, higher operational reliability is also convincing for sustainability experts: At the DGNB Sustainability Challenge, the annual prize competition run by the German Society for Sustainable Building, our hybrid lifting station was ranked among the top 3 product and service innovations of the year.
The Ecolift hybrid lifting unit is the ideal solution for detached houses that require reliable and efficient wastewater disposal. Whether for installation in the open wastewater pipe or directly in the floor slab, this innovative system utilises the natural gradient to the sewer to transport the wastewater in an environmentally friendly way.
Features & benefits
- Pumps only when backwater occurs — otherwise uses natural gradient to sewer
- 90% lower energy consumption compared to conventional lifting stations
- Reduced maintenance requirements due to infrequent operation
- Increased reliability — operates without power in normal gradient conditions
- Available in nominal sizes DN 100 (Ø 110 mm), DN 125 (Ø 125 mm), DN 150 (Ø 160 mm), DN 200 (Ø 200 mm)
- Installation options: exposed drainage pipe or floor slab
- Floor slab version available with black cover or tileable cover
- Tested and certified as radon-proof (floor slab installation)
- Compatible with waterproof concrete installation via extension piece with central flange and elastomer waterproofing membrane
- Integrated drainage function pumps surface water (e.g. from pipe break) even during backwater conditions
- Plug-in ready Comfort control unit with self-diagnosis system (SDS)
- SDS display shows operating status and maintenance information
- Connection option for centralised control systems
- DGNB Sustainability Challenge top 3 product and service innovation
Applications
- Detached houses requiring reliable and efficient wastewater disposal
- Basement drainage below backwater level
- Installation in exposed wastewater drainage pipe
- Installation directly in floor slab
- Buildings where radon ingress prevention is required
- Installation in waterproof concrete structures
Article overview
Ecolift backwater lifting station M
Installation in an exposed drainage pipe
Installation in an exposed drainage pipe
| Picture | Nominal size (DN) | Length | Width | Item no. | Show |
|---|---|---|---|---|---|
 | 405 mm | 243 mm | 21000 | Show 21000 | |
 | 100 | 642 mm | 243 mm | 21100 | Show 21100 |
 | 125 | 645 mm | 243 mm | 21125 | Show 21125 |
 | 150 | 656 mm | 243 mm | 21150 | Show 21150 |
 | 200 | 720 mm | 243 mm | 21200 | Show 21200 |
Ecolift backwater lifting station M Underfloor
Floor slab installation
With black cover
| Picture | Type of cover | Nominal size (DN) | Length | Width | Item no. | Show |
|---|---|---|---|---|---|---|
 | Cover plate with slotted cover | - | 590 mm | 590 mm | 21000S | Show 21000S |
 | Cover plate with slotted cover | 100 | 642 mm | 590 mm | 21100S | Show 21100S |
 | Cover plate with slotted cover | 125 | 645 mm | 590 mm | 21125S | Show 21125S |
 | Cover plate with slotted cover | 150 | 656 mm | 590 mm | 21150S | Show 21150S |
 | Cover plate with slotted cover | 200 | 720 mm | 590 mm | 21200S | Show 21200S |
With tileable cover
| Picture | Type of cover | Nominal size (DN) | Length | Width | Item no. | Show |
|---|---|---|---|---|---|---|
 | tileable cover plate | 100 | 642 mm | 590 mm | 21100X | Show 21100X |
 | tileable cover plate | 125 | 645 mm | 590 mm | 21125X | Show 21125X |
 | tileable cover plate | 150 | 656 mm | 590 mm | 21150X | Show 21150X |
 | tileable cover plate | 200 | 720 mm | 590 mm | 21200X | Show 21200X |
Shell Kit Ecolift backwater lifting station M
for Ecolift M
Shell Kit
| Picture | Type of cover | Item no. | Show |
|---|---|---|---|
 | 21000-RBK | Show 21000-RBK |
for Ecolift M Underfloor
Shell Kit
| Picture | Type of cover | Item no. | Show |
|---|---|---|---|
 | Cover plate with slotted cover | 21000S-RBK | Show 21000S-RBK |
 | tileable cover plate | 21000X-RBK | Show 21000X-RBK |
Technology kit Pumpfix M hybrid lifting station
Technology kit
Technology kit
| Picture | Type of cover | Item no. | Show |
|---|---|---|---|
 | 20000-TK | Show 20000-TK |