Lifting station Aqualift 100 and 200

The lifting station Aqualift 100 and 200 is the perfect choice for renovations or other installation situations that require an exposed installation. Due to its small installation area, it can also be easily integrated into small rooms by means of retrofitting. Thanks to the one-handed closure that can be operated without tools, maintenance is easy to carry out.

It is available with wastewater tanks in two sizes, as well as different pump capacities. There is also a choice between a single pump with a float or control unit, and two pumps with a control unit. This makes the Aqualift 100 and 200 suitable for a wide variety of applications including the drainage of grease separators. If requirements change, the system can be converted from one to two pumps or another pump type at any time.

Existing premises, little space or an existing pump sump: Flexible drainage solutions that adapt perfectly to the local conditions are required in the case of renovations. The Aqualift 100 and Aqualift 200 are designed precisely for this purpose: Available in two sizes with different pump capacities, suitable for an exposed installation and retrofittable with two pumps.

The Aqualift 100 and 200 Duo with two pumps are ideally suited for applications in which the drainage operation cannot be interrupted. This applies in particular to the drainage of grease separators. The large access cover, which can be opened without tools using one-handed closures, also contributes to the system's reliability.

Features & benefits

Tanks with capacity of 100 and 200 litres available
Both tanks fit through standard 80 cm wide doorways
Retrofittable into most rooms without issue
Available with one or two pumps
Four pump models to choose from: 650-watt pump in S1 operating mode (continuous operation) with float switch or switchgear; 1.3-kilowatt pump in S3 operating mode (batch operation) with switchgear
Both pump types available in resistant versions (resistant to condensate from condensing boilers and brine water)
One-handed closure operated without tools
Easy maintenance access via large access cover
Convertible from single to dual pump system at any time
Suitable as sampling chamber when combined with grease separator — no separate sampling chamber installation needed

Applications

Basement drainage in apartment blocks with multiple washing machines
Renovation installations in existing pump sumps
Commercial kitchens with grease separator systems
Space-constrained installations
Drainage operations requiring continuous, uninterrupted service
Grease separator drainage

Article overview

Aqualift 100/200 lifting station

Aqualift 100

Pneumatic level measurement

Pump	Type of wastewater	Type of system	Item no.	Show
GTF 600	without sewage	Single unit	28513	Show 28513
GTF 1250	without sewage	Single unit	28514	Show 28514
GTF 600	without sewage	duo pump	28515	Show 28515
GTF 1250	without sewage	duo pump	28516	Show 28516

Mechanical level measurement

Picture	Pump	Type of wastewater		Type of system	Item no.	Show
	GTF 600	without sewage		Single unit	28511	Show 28511
	GTF 1250	without sewage		Single unit	28512	Show 28512

Aqualift 200

Pneumatic level measurement

Picture	Pump	Type of wastewater		Type of system	Item no.	Show
	GTF 600	without sewage		duo pump	28517	Show 28517
	GTF 1250	without sewage		duo pump	28518	Show 28518

Aqualift 100/200 lifting station resistant

Aqualift 100

Pump	Type of wastewater	Type of system	Type of level measurement	Item no.	Show
GTF 600 resistant	without sewage	Single unit	mechanical	28511C	Show 28511C
GTF 1250 resistant	without sewage	Single unit	mechanical	28512C	Show 28512C
GTF 600 resistant	without sewage	Single unit	pneumatic	28513C	Show 28513C
GTF 1250 resistant	without sewage	Single unit	pneumatic	28514C	Show 28514C
GTF 600 resistant	without sewage	duo pump	pneumatic	28515C	Show 28515C
GTF 1250 resistant	without sewage	duo pump	pneumatic	28516C	Show 28516C